|
Papers in English Journals Print E-mail
Papers - Journal
Saturday, 27 March 2010 20:14

Journal Papers

 

#

Authors

Title

Journal

Vol.

No.

Date

pp

1 S.K. Sadrnezhaad
J.D. Nauman
J.F. Elliott
Effect of Gas Evolution on Melting of DRI Pellets in Liquid Slags Journal of Metals 27 12 1975 A58-A58
2 S.K. Sadrnezhaad
J. F. Elliott
The Melting Rate of DRI Pellets in Steelmaking Slags Iron and Steel International - - 1980 327-339
3 S.K. Sadrnezhaad Continuous Melting of Metallized Ore Pellets Iron and Steel International - - 1981 309-314
4 K. Sadrnezhaad Designing a New System for Technical and Engineering Education AEESCA Journal of Engineering Education 1 7 1981 71-74
5 S.K. Sadrnezhaad Role of Laboratories in Technical Education AEESCA Journal of Engineering Education 1 7 1981 21-22
6 S.K. Sadrnezhaad Sulfur Species in Particulates Emitted from Reducing Coal Combustion and Pyrometallurgical Furnaces Journal of Engineering 1 1 1988 73-78
7 S.K. Sadrnezhaad Direct Reduced Iron: An Advantageous Charge Material for Induction Furnaces Journal of Engineering 3 1&2 1990 37-47
8 S.K. Sadrnezhaad Effect of Inoculation on Microstructure and Properties of C-Mn and Low Alloy Steels Journal of Engineering 4 1&2 1991 65-72
9 S.K. Sadrnezhaad Thermodynamics and Kinetics of Vaporization of PbS from Complex Cu-Fe Mattes Journal of Engineering 8 4 1995 199-211
10 S.K. Sadrnezhaad Effect of Impurities on Energy Requirements in Electric Steelmaking with DRI Scientia Iranica 3 1,2,3 1996 113-119
11 F.M.H. Zarandi
K. Sadrnezhaad
Thermomechanical Study in Combustion Synthesized Ti-Ni Shape Memory Alloy Materials and Manufacturing Processes 12 6 1997 1093-1105
12 S.K. Sadrnezhaad
F. Mashhadi
R. Sharghi
Heat Treatment of Ni-Ti Alloy for Improvement of Shape Memory Effect Materials and Manufacturing Processes 12 1 1997 107-115
13 S.K. Sadrnezhaad
A. Simchi
Simulation of the Iron Smelting-Reduction Process Journal of Materials Science and Technology 15 2 1999 121-127
14 E. Keshavarz Alamdari
S.K. Sadrnezhaad
Thermodynamics of Extraction of MoO42- from Aqueous Sulfuric Acid Media with TBP Dissolved in Kerosene Hydrometallurgy 55 3 2000 327-341
15 S.K. Sadrnezhaad
E. Keshavarz Alamdari
Thermodynamics of Extraction of ReO4- from Aqueous Sulfuric Acid Media with Tri-n-Butyl Phosphate Dissolved in Kerosene Metallurgical and Materials Transactions B 32B 1 2001 5-10
16 S.K. Sadrnezhaad
A. Gharavi
A. Namazi
Software for Kinetic Process Simulation IJE Transactions A: Basics 16 1 2003 61-72
17 M. Monajjemi
F. Mollaamin
M. R. Gholami
H. Yoozbashizadeh
S.K. Sadrnezhaad
H. Passdar
Quantum Chemical Parameters of Some Organic Corrosion Inhibitors, Pyridine, 2-Picoline 4-Picoline and 2,4-Lutidine, Adsorption at Aluminum Surface in Hydrochloric and Nitric Acids and Comparison Between Two Acidic Media Main Group Metal Chemistry 26 6 2003 349-361
18 S. Badakhshan Raz
S.K. Sadrnezhaad
Effects of VIM Frequency on Chemical Composition, Homogeneity and Microstructure of NiTi Shape Memory Alloy Materials Science and Technology 20 5 2004 593-598
19 S.K. Sadrnezhaad
A.R. Selahi
Effect of Mechanical Alloying and Sintering on Ni-Ti Powders Materials and Manufacturing Processes 19 3 2004 475-486
20 S.K. Sadrnezhaad
E. Keshavarz Alamdari
Thermodynamics of Extraction of Zn2+ from Sulfuric Acid Media with a Mixture of DEHPA and MEHPA IJE Transactions B: Applications 17 2B 2004 193-202
21 B. Hashemi
Z.A. Nemati
S.K. Sadrnezhaad
Oxidation Mechanisms in MgO-C Refractories China's Refractories 13 2 2004 13-18
22 S.K. Sadrnezhaad
S. Badakhshan Raz
Interaction between Refractory Crucible Materials and the Melted NiTi Shape Memory Alloy Metallurgical and Materials Transactions B 36B 3 2005 395-403
23 D. Darvishi
D.F. Haghshenas
E. Keshavarz Alamdari
S.K. Sadrnezhaad
M. Halali
Synergistic Effect of Cyanex 272 or Cyanex 302 on Separation of Cobalt and Nickel by D2EHPA Hydrometallurgy 77 3-4 2005 227-238
24 S. Badakhshan Raz
S.K. Sadrnezhaad
Microstructural Investigation of Hard Phases in As Cast Ni-Ti Memory Alloy Praktische Metallurgraphie 42 9 2005 454-469
25 S. Sanjabi
S.K. Sadrnezhaad
K.A. Yates
Z.H. Barber
Growth and Characterization of TixNi1-x Shape Memory Thin Films Using Simultaneous Sputter Deposition From Separate Elemental Targets Thin Solid Films 491 1-2 2005 190-196
26 S.K. Sadrnezhaad
S. Badakhshan Raz
Ingredient Losses during Melting Binary Ni-Ti Shape Memory Alloys Journal of Materials Science and Technology 21 4 2005 484-488
27 E. Keshavarz Alamdari
S.K. Sadrnezhaad
Z. Moshefi Shabestari
Chloroform Aided Extraction Spectrophotometric Determination of Rhenium Using Thiocyanate Complexing Agent J. Mater. Sci. Technol. 21 2 2005 239-242
28 Z.A. Nemati
S.K. Sadrnezhaad
H.R. Ahmadi Moghari
Effect of Ferrosilicon, Silicon and Aluminum Antioxidants on Microstructure and Mechanical Properties of Magnesia-Graphite Refractory Refractories Applications and News 10 - 2005 2-9
29 Z.A. Nemati
S.K. Sadrnezhaad
B. Hashemi
Behavior of ZrSiO4 in a reducing atmosphere Internationales Feuerfest-Kolloqium 48 - 2005 130-133
30 S. Sanjabi
Y.Z. Cao
S.K. Sadrnezhaad
Z.H. Barber
Binary and ternary NTi-based shape memory films deposited by simultaneous sputter deposition from elemental targets J. Vac. Sci. Technol. A 23 5 2005 1425-1429
31 S.K. Sadrnezhaad
O. Lashkari
Property Change during Fixtured Sintering of NiTi Memory Alloy Materials and Manufacturing Processes 21 1 2006 87-96
32 S.K. Sadrnezhaad
H. Arami
H. Keivan
R. Khalifezadeh
Powder Metallurgical Fabrication and Characterization of Nanostructured Porous NiTi Shape Memory Alloy Materials and Manufacturing Processes 21 8 2006 727-735
33 S.K. Sadrnezhaad
S. Mahshid
B. Hashemi
Z.A. Nemati
Oxidation Mechanism of C in MgO-C Refractory Bricks Journal of the American Ceramic Society 89 4 2006 1308-1316
34 S.K. Sadrnezhaad
M.R. Vaezi
The effect of addition of Tiron as a surfactant on the microstructure of chemically deposited zinc oxide Materials Science and Engineering B 128 1-3 2006 53-57
35

B. Hashemi
Z.A. Nemati
S.K. Sadrnezhaad
Z.A. Moghimi

Kinetic Parameters Estimation of MgO-C Refractory by Shrinking Core Model Journal of Materials Science and Technology 22 6 2006 826-832
36

M.R. Vaezi
S.K. Sadrnezhaad

Effects of substrate material and annealing temperature on morphology of zinc oxide films Materials Science and Technology 22 3 2006 308-314
37 S. Espiari
F. Rashchi
S.K. Sadrnezhaad
Hydrometallurgical treatment of tailings with high zinc content Hydrometallurgy 82 1 2006 54-62
38 M. Mazloumi
R. Khalifehzadeh
S.K. Sadrnezhaad
H. Arami
Alumina Nanopowder Production from Synthetic Bayer Liquor Journal of the American Ceramic Society 89 12 2006 3654–3657
39 S.K. Sadrnezhaad
E. Ahmadi
M. Mozammel
Kinetics of Silver Dissolution in Nitric Acid from Ag-Au0.04-Cu00.10 and Ag-Cu0.23 Scraps Journal of Materials Science and Technology 22 5 2006 696-700
40 S. Sanjabi
S.K. Sadrnezhaad
Z.H. Barber
Sputter alloying of Ni, Ti and Hf for fabrication of high temperature shape memory thin films Materials Science and Technology 23 8 2007 987-991
41 M.R. Vaezi
S.K. Sadrnezhaad
Highly textured ZnO thin films: An economical fabrication, doping by Mn2+ and Sn2+ and approachment for optical devices Materials and Design 28 3 2007 1065-1070
42 S.K. Sadrnezhaad
S.H. Mirabolghasemi
Optimum temperature for recovery and recrystallization of 52Ni48Ti shape memory alloy Materials and Design 28 6 2007 1945-1948
43 H. Arami
M. Mazloumi
R. Khalifehzadeh
A. Lak
S.K. Sadrnezhaad
Self-assembled dahlia-like cadmium hydrogen phosphate hydrate nanostructures as templates for cadmium hydroxyapatite hexagonal prisms Journal of Crystal Growth 309 1 2007 37-42
44 M. Mozammel
S.K. Sadrnezhaad
E. Badami
E. Ahmadi
Breakthrough curves for adsorption and elution of rhenium in a column ion exchange system Hydrometallurgy 85 1 2007 17-23
45 S.K. Sadrnezhaad
M.R. Vaezi
Kinetics of TSCD zinc oxide nano-layer growth by modified diffuse-interface model Ceramics International 33 8 2007 1409-1417
46 M.R. Vaezi
S.K. Sadrnezhaad
Nanopowder synthesis of zinc oxide via solochemical processing Materials & Design 28 2 2007 515-519
47 M. Mazloumi
H. Arami
R. Khalifehzadeh
S.K. Sadrnezhaad
Studies on synthesis of alumina nanopowder from synthetic Bayer liquor Materials Research Bulletin 42 6 2007 1004–1009
48 S.K. Sadrnezhaad
Z.A. Nemati
S. Mahshid
S. Hosseini
B. Hashemi
Effect of Al Antioxidant on the Rate of Oxidation of Carbon in MgO–C Refractory Journal of the American Ceramic Society 90 2 2007 509-515
49 R. Khalifehzadeh
S. Forouzan
H. Arami
S.K. Sadrnezhaad
Prediction of the effect of vacuum sintering conditions on porosity and hardness of porous NiTi shape memory alloy using ANFIS Computational Materials Science 40 3 2007 359-365
50 H. Arami
M. Mazloumi
R. Khalifezadeh
S.K. Sadrnezhaad
Sonochemical preparation of TiO2 nanoparticles Materials Letters 61 23-24 2007 4559-4561
51 H. Arami
M. Mazloumi
R. Khalifehzadeh
S. Hojjati Emami
S.K. Sadrnezhaad
Polypyrrole/multiwall carbon nanotube nanocomposites electropolymerized on copper substrate Materials Letters 61 22 2007 4412-4415
52 M.R. Vaezi
S.K. Sadrnezhaad
Gas sensing behavior of nanostructured sensors based on tin oxide synthesized with different method Materials Science and Engineering B 140 1-2 2007 73-80
53 D.F. Haghshenas
D. Darvishi
Z. Mos'hefi Shabestari
E. Keshavarz Alamdari
S.K. Sadrnezhaad
Leaching Recovery of Zinc, Cobalt and Manganese from Zinc Purification Residue IJE Transactions B 20 2 2007 133-140
54 H. Arami
M. Mazloumi
R. Khalifehzadeh
S.K. Sadrnezhaad
Electron Beam-Induced ‘‘Nanocalcination’’ of Boehmite Nanostrips to Mesoporous a-Alumina Phase J. Am. Ceram. Soc. 90 10 2007 3311-3313
55 M.R. Vaezi
S.K. Sadrnezhaad
Improving the electrical conductance of chemically deposited zinc oxide thin films by Sn dopant Materials Science and Engineering B 141 1-2 2007 23-27
56 D. Darvishi
D.F. Haghshenas
S. Etemadi
E. Keshavarz Alamdari
S.K. Sadrnezhaad
Water adsorption in the organic phase for the D2EHPA-kerosene/water and aqueous Zn2+, Co2+, Ni2+sulphate systems Hydrometallurgy 88 1-4 2007 92-97
57 M. Farzalipour Tabriz
P. Salehpoor
A. Esmaielzadeh
M.R. Vaezi
S.K. Sadrnezhaad
IJE Transactions A: Basics 20 3 2007 281-291
58 S. Shahandeh
H. Arami
S.K. Sadrnezhaad
Interfacial Energy Determination of Nano-scale Precipitates by CALPHAD Description of Gibbs-Thomson Effect Journal of Materials Science 42 22 2007 9440-9446
59 M.R. Mohammadi
D.J. Fray
S.K. Sadrnezhaad
A.Mohammadi
A simple particulate sol–gel route to synthesize nanostructural TiO2–Ta2O5 binary oxides and their characteristics Materials Science and Engineering B 142 1 2007 16-27
60 S.K. Sadrnezhaad
S.Badakhshan Raz
Effect of Microstructure on Rolling Behavior of NiTi Memory Alloy Materials and Manufacturing Processes 23 7 2008 646-650
61 M.R. Vaezi
S.K. Sadrnezhaad
L. Nikzad
Electrodeposition of Ni-SiC nano-composite coatings and evaluation of wear and corrosion resistance and electroplating characteristics Colloids and Surfaces A: Physicochemical and Engineering Aspects 315 1-3 2008 176-182
62 A. Shokuhfar
S. Alibeigi
M.R. Vaezi
S.K. Sadrnezhad
Synthesis of Fe3O4 Nanoparticles Prepared by Various Surfactants and Studying their Characterizations Defect and Diffusion Forum 273-276   2008 22-27
63 M.R. Vaezi
S.K. Sadrnezhaad
Two-Stage Chemical Deposition of Oxide Films IJE Transactions B: Applications 21 1 2008 65-70
64 S.K. Sadrnezhaad
A. Ferdowsi
H. Payab
Mathematical Model for a Straight Grate Iron Ore Pellet Induration Process of Industrial Scale Computational Materials Science 44 2 2008 296-302
65 S.A. Manafi
B. Yazdani
M.R. Rahimipour
S.K. Sadrnezhaad
M.H. Amin
M. Razavi
Synthesis of nano-hydroxyapatite under a sonochemical/hydrothermal condition Biomedical Materials 3 2 2008 025002
66 M. Mazaheri
Z. Razavi Hesabi
S.K. Sadrnezhaad
Two-Step Sintering of Titania Nanoceramics Assisted by Anatase-to-Rutile Phase Transformation Scripta Materialia 59 2 2008 139-142
67 H. Arami
M. Mazloumi
R. Khalifehzadeh
S.K. Sadrnezhaad
Bundles of self assembled boehmite nanostrips from a surfactant free hydrothermal route Journal of Alloys and Compounds 461 1-2 2008 551-554
68 T. Shokuhfar
M.R. Vaezi
S.K. Sadrnezhad
A. Shokuhfar
Synthesis of zinc oxide nanopowder and nanolayer via chemical processing Int. J. Nanomanufacturing 2 1/2 2008 149-162
69 M. Torabi
R. Khalifehzadeh
H. Arami
S.K. Sadrnezhad
ELECTROCHEMICAL DEPOSITION OF FLOWER-LIKE NICKEL NANOSTRUCTURES ON WELL-DEFINED n-Si(111):H IJE Transactions B: Applications 21 2 2008 177-182
70 A. Lak
M. Mazloumi
M. Mohajerani
A. Kajbafvala
S. Zanganeh
H. Arami
S.K. Sadrnezhaad
Self-Assembly of Dandelion-Like Hydroxyapatite Nanostructures Via Hydrothermal Method J. Am. Ceram. Soc. 91 10 2008 3292-3297
71 M.R. Vaezi
A. Shokuhfar
S.K. Sadrnezhad
T. Shokuhfar
SnO2/ZnO double-layer thin films: a novel economical preparation and investigation of sensitivity and stability of double-layer gas sensors Int. J. Nanomanufacturing 2 1/2 2008 59-69
72 M. Mazloumi
S. Zanganeh
A. Kajbafvala
M.R. Shayegh
S.K. Sadrnezhaad
Formation of Lanthanum Hydroxide Nanostructures: Effect of NaOH and KOH Solvents IJE Transactions B: Applications 21 2 2008 169-176
73 M.S. Mohajerani
M. Mazloumi
A. Lak
A. Kajbafvala
S. Zanganeh
S.K. Sadrnezhaad
Self-assembled Zinc oxide nanostructures via a rapid microwave-assisted route Journal of Crystal Growth 310 15 2008 3621-3625
74 J. Nourmohammadi
S.K. Sadrnezhaad
A.B. Ghader
Bone-like apatite layer formation on the new resin-modified glass-ionomer cement Journal of Materials Science: Materials in Medicine 19 12 2008 3507-3514
75 H. Arami
M. Mazloumi
R. Khalifezadeh
S.K. Sadrnezhaad
Surfactant Free Hydrothermal Formation of Pb3O4Nanorods Journal of Alloys and Compounds 466 1-2 2008 323-325.
76 M. Mazloumi
M. Attarchi
A. Lak
M. Sadat Mohajerani
A. Kajbafvala
S. Zanganeh
S.K. Sadrnezhaad
Boehmite nanopetals self assembled to form rosette-like nanostructures Materials Letters 62 26 2008 4184-4186
77 H. Arami
M. Mazloumi
R. Khalifehzadeh
S.K. Sadrnezhaad
Bundles of self-assembled boehmite nanostrips from a surfactant free hydrothermal route Journal of Alloys and Compounds 461 1-2 2008 551-554
78 A. Lak
M. Mazloumi
M.S. Mohajerani
S. Zanganeh
M.R. Shayegh
A. Kajbafvala
H. Arami
S.K. Sadrnezhaad
Rapid Formation of Mono-Dispersed Hydroxyapatite Nanorods with Narrow-Size Distribution via Microwave Irradiation J. Am. Ceram. Soc. 91 11 2008 3580-3584
79 M. Mazaheri
A.M. Zahedi
S.K. Sadrnezhaad
Two-Step Sintering of Nanocrystalline ZnO Compacts: Effect of Temperature on Densification and Grain Growth Journal of the American Ceramic Society 91 1 2008 56-63
80 Y.B. Mollamahaleh
S.K. Sadrnezhaad
D. Hosseini
NiO Nanoparticles Synthesis by Chemical Precipitation and Effect of Applied Surfactant on Distribution of Particle Size Journal of Nanomaterials - - 2008 1-4
81 S. Manafi
M.R. Rahimipour
B. Yazdani
S.K. Sadrnezhaad
M.H. Amin
Hydrothermal Synthesis of Aligned Hydroxyapatite Nanorods with Ultra-High Crystallinity IJE Transactions B: Applications 21 2 2008 109-116
82 S.K. Asl
S.K. Sadrnezhaad
M. Kianpoor
Photocatalytic Decolorization of Red Dye in Aqueous ZnO-TiO2 Suspensions Advanced Materials Research 55-57  - 2008 577-580
83 S.K. Sadrnezhaad
S. Sanjabi
E. Rezvani
A.A. Ziaei Moayed
Pulsed-Laser Annealing of NiTi Thin Film Shape Memory Alloy J. Mater. Sci. Technol. 25 1 2009 135-140
84 M. Mazaheri
M. Valefi
Z. Razavi Hesabi
S.K. Sadrnezhaad
Two-Step Sintering of Nanocrystalline 8Y2O3 Stabilized ZrO2 Synthesized by Glycine Nitrate Ceramics International 35 1 2009 13-20
85 H. Arami
M. Mazloumi
R. Khalifehzadeh
S.K. Sadrnezhaad
Self assembled nanostructured ZnO hollow spheres with UVA luminescence Advances in Applied Ceramics 108 2 2009 73-77
86 M. Mazloumi
S. Taghavi
H. Arami
S. Zanganeh
A. Kajbafvala
M.R. Shayegh
S.K. Sadrnezhaad
Self-assembly of ZnO nanoparticles and subsequent formation of hollow microspheres Journal of Alloys and Compounds 468 1-2 2009 303-307
87 A. Kajbafvala
M.R. Shayegh
M. Mazloumi
S. Zanganeh
A. Lak
M. Sadat Mohajerani
S.K. Sadrnezhaad
Nanostructure sword-like ZnO wires: Rapid synthesis and characterization through a microwave-assisted route Journal of Alloys and Compounds 469 1-2 2009 293-297
88 H. Arami
M.S. Mohajerani
R. Khalifehzadeh
A. Lak
S.K. Sadrnezhaad
Rapid formation of hydroxyapatite nanostrips via microwave irradiation Journal of Alloys and Compounds 469 1-2 2009 391-394
89 M. Mazloumi
N. Shahcheraghi
A. Kajbafvala
S. Zanganeh
A. Lak
M.S. Mohajerani
S.K. Sadrnezhaad
3D bundles of self-assembled lanthanum hydroxide nanorods via a rapid microwave-assisted route Journal of Alloys and Compounds 473 1-2 2009 283-287
90 M. Mazloumi
S. Zanganeh
A. Kajbafvala
P. Ghariniyat
S. Taghavi
A. Lak
M. Mohajerani
S.K. Sadrnezhaad
Ultrasonic induced photoluminescence decay in sonochemically obtained cauliflower-like ZnO nanostructures with surface 1D nanoarrays Ultrasonics Sonochemistry 16 1 2009 11-14
91 A.M. Bazargan
M. Naghavi
M. Mazaheri
S.K. Sadrnezhaad
Simultaneous synthesis and single-step sintering of lead magnesium niobate ceramic using mixed nanopowders Ceramics International 35 3 2009 1139-1144
92 M. Mazaheri
S.A. Hassanzadeh
S.K. Sadrnezhaad
Hot pressing of nanocrystalline zinc oxide compacts: Densification and grain growth during sintering Ceramics International 35 3 2009 991-995
93 M. Mazaheri
A.M. Zahedi
M. Haghighatzadeh
S.K. Sadrnezhaad
Sintering of titania nanoceramic: Densification and grain growth Ceramics International 35 2 2009 685-691
94 M. Mazaheri
M. Haghighatzadeh
A.M. Zahedi
S.K. Sadrnezhaad
Effect of a novel sintering process on mechanical properties of hydroxyapatite ceramics Journal of Alloys and Compounds 471 1-2 2009 180-184
95 Z. Razavi
M. Haghighatzadeh
M. Mazaheri
D. Galusek
S.K. Sadrnezhaad
Suppression of grain growth in sub-micrometer alumina via two-step sintering method Journal of the European Ceramic Society 29 8 2009 1371-1377
96 S.K. Sadrnezhaad
E. Ahmadi
M. Malekzadeh
Mechanism of Reaction of Molten NiTi with EBM Graphite Crucible Materials Science and Technology 25 6 2009 699-706
97 S.Sanjabi
M. Naderi
H. Zare Bidaki
S.K. Sadrnezhaad
Characterization of Sputtered NiTi Shape Memory Alloy Thin Films Scientia Iranica 16 3 2009 248-252
98 R.A. Rahimi
G. Raisali
S.K. Sadrnezhaad
A. Alipour
Chemical corrosion and gamma-ray attenuation properties of Zr and Ti containing lead silicate glasses Journal of Nuclear Materials 385 3 2009 527-532
99 R.A. Rahimi
S.K. Sadrnezhaad
G. Raisali
Chemical durability of lead silicate glass in HNO3, HCl and H2SO4 aqueous acid solutions Journal of Non-Crystalline Solids 355 3 2009 169-174
100 S.K. Sadrnezhaad
N. Hassanzadeh
R. Bagheri
Improved Adhesion of NiTi Wire to Silicone Matrix for Smart Composite Medical Applications Materials & Design 30 9 2009 3667-3672
101 M. Attarchi
M. Mazloumi
S.K. Sadrnezhaad
A. Jafari
M. Asadi
Formation and rupture of carbonate film: an electrochemical noise approach Anti-Corrosion Methods and Materials 56 2 2009 103-109
102 M. Attarchi
M. Mazloumi
I. Behckam
S.K. Sadrnezhaad
EIS study of porous NiTi biomedical alloy in simulated body fluid Materials & Corrosion 60 11 2009 871-875
103 R.A. Rahimi
S.K. Sadrnezhaad
G. Raisal
A. Hamidi
Hydrolysis kinetics of lead silicate glass in acid solution Journal of Nuclear Materials 389 3 2009 427-431
104 A. Azizi
H. Yoozbashizadeh
S.K. Sadrnezhaad
Effect of hydrogen reduction on microstructure and magnetic properties of mechanochemically synthesized Fe-16.5Ni-16.5Co nano-powder Journal of Magnetism and Magnetic Materials 321 18 2009 2729-2732
105 M. Salehi
B. Janfeshan
S.K. Sadrnezhaad
Growth of tin oxide nanotubes by aerial carbothermal evaporation Applied Physics A: Materials Science & Processing 97 2 2009 361-364
106 A. Azizi
S.K. Sadrnezhaad
Synthesis of Fe-Ni nano-particles by low-temperature hydrogen reduction of mechanically alloyed Ni-Ferrite
Journal of Alloys and Compounds 485 1-2 2009 484-487
107 H. Ataee-Esfahania
M.R. Vaezi
L. Nikzad
B. Yazdani
S.K. Sadrnezhaad
Influence of SiC nanoparticles and saccharin on the structure and properties of electrodeposited Ni–Fe/SiC nanocomposite coatings Journal of Alloys and Compounds 484 1-2 2009 540-544
108 S.A. Hosseini
S.K. Sadrnezhaad
A. Ekrami
Phase transformation behavior of porous NiTi alloy fabricated by powder metallurgical method Materials Science and Engineering: C 29 7 2009 2203-2207
109 S.K. Sadrnezhaad
S.A. Hosseini
Fabrication of porous NiTi-shape memory alloy objects by partially hydrided titanium powder for biomedical applications Materials and Design 30 10 2009 4483-4487
110 M. Attarchi
M.S. Roshan
S. Norouzi
S.K. Sadrnezhaad
Electrochemical potential noise analysis of Cu–BTA system using wavelet transformation Materials and Design 633 1 2009 240-245
111 M. Mazaheri
Z. Razavi
F. Golestani-Fard
S. Mollazadeh
S. Jafari
S.K. Sadrnezhaad
The Effect of Conformation Method and Sintering Technique on the Densification and Grain Growth of Nanocrystalline 8 mol% Yttria-Stabilized Zirconia Journal of the American Ceramic Society 92 5 2009 990-995(6)
112 M. Attarchi
S.K. Sadrnezhaad
Pulse Reverse Electrodeposition of Spherical Ni-MWCNT Composite Skein IJE Transactions B: Applications 22 2 2009 161-168
113 M. Zakeri
M.R. Rahimipour
S.K. Sadrnezhaad
R. Yazdani-rad
Preparation of Al2O3–TiC nanocomposite by mechano-chemical reduction of TiO2 with aluminum and graphite Journal of Alloys and Compounds 482 1-2 2009 320-325
114 F. Nematzadeh
M.R. Akbarpour
A.H. Kokabi
S.K. Sadrnezhaad
Structural changes of radial forging die Surface during service under thermo mechanical fatigue Materials Science and Engineering A 527 1-2 2009 98-102
115 S.K. Sadrnezhaad
R.A. Rahimi
G. Raisali
F. Foruzanfar
Mechanism of deleading of silicate glass by 0.5 N HNO3 Journal of Non-Crystalline Solids 355 48-49 2009 2400-2404
116 A.M. Bazargan
Z. Gholamvand
M.R. Shayegh
S.K. Sadrnezhaad
Phase inversion preparation and morphological study of polyvinylidene fluoride ultrafiltration membrane modified by nano-sized alumina Functional Materials Letters (FML) 2 3 2009 113-119
117 M.R. Vaezi
S.K. Sadrnezhaad
Thermodynamic Evaluation of Adsorption of Zinc Complex and ZnO Nano-Layer Prepared by TSCD Method Based on Langmuir Adsorption Model IJE Transactions B: Applications 22 2 2009 179-184
118 S.K. Sadrnezhaad
M. Mazloumi
H. Arami
R. Khalifehzadeh
Synthesis of γ-Alumina Nanopowders from Synthetic Bayer Liquor and its Application for Oil and Gas Industries JOURNAL OF NANOCOMPOSITE MATERIALS RESEARCH (JNMR) 1 2 2009 71-76
119 M. Torabi
S.K. Sadrnezhaad
Electrochemical synthesis of flake-like Fe/MWCNTs nanocomposite for hydrogen evolution reaction: Effect of the CNTs on dendrite growth of iron and its electrocatalytic activity Current Applied Physics 10 1 January 2010 72-76
120 Hamid Abdoli
E. Saebnouri
S.K. Sadrnezhaad
M. Ghanbari
Processing and surface properties of Al-AlN composites produced from nanostructured milled powders Journal of Alloys and Compounds 490 1-2 February 2010 624-630
121 S.A. Hassanzadeh
M. Mazaheri
M. Aminzare
S.K. Sadrnezhaad
Reverse precipitation synthesis and characterization of CeO2 nanopowder Journal of Alloys and Compounds 491 1 February 2010 499-502
122 M. Zakeri
M.R. Rahimipour
S.Kh. Sadrnezhad
R. Yazdanni-rad
Journal of Alloys and Compounds 491 1 February 2010 203-208
123 M. Zakeri
M.R. Rahimipour
S.K. Sadrnezhad
Journal of Alloys and Compounds 492 1 March 2010 226-230
124 S.S. Razavi
M.B. Rahaei
M.S. Abdi
S.K. Sadrnezhaad
Stabilization of nanostructured materials using fine inert ceramic particles Ceramics International 36 2 March 2010 793-796
125 S. Zanganeh
A. Kajbafvala
N. Zanganeh
M.S. Mohajerani
A. Lak
M.R. Bayati
H.R. Zargar
S.K. Sadrnezhaad
Self-assembly of boehmite nanopetals to form 3D high surface area nanoarchitectures Appl. Phys A, Materials Science and Processing 99 1 April
2010
317-321
126 E. Ahmadi
M. Malekzadeh
S.K. Sadrnezhaad
15 wt%Cu nano-composite produced by hydrogen-reduction/sintering of WO3–CuO nano-powder International Journal of Refractory Metals and Hard Materials 28 3 May
2010
441-445
127 A. Kajbafvala
S. Zanganeh
E. Kajbafvala
H.R. Zargar
M.R. Bayati
S.K. Sadrnezhaad
Microwave-assisted synthesis of narcis-like zinc oxide nanostructures Journal of Alloys and Compounds 497 1-2 May
2010
325-329
128 J. Nourmohammadi
S.K. Sadrnezhaad
A. Behnamghader
In vitro bioactivity of novel cured ionomer cement based on iron oxide Ceramics International 36 5 July
2010
1645-1651
129 B. Yarmand
S.K. Sadrnezhaad
Influence of annealing temperature on structural and optical properties of mesoporous TiO2 thin films prepared by sol- gel templating technique Journal of Optoelectronics and Advanced Materials 12 7 July
2010
1490-1497
130 M. Mazaheri
Z. Razavi Hesabi
M. Haghighatadeh
S.K. Sadrnezhaad
Sintering and Grain Growth Behaviour of Ultra Fine Al2O3 Powder Ceramic Materials 62 3 August
2010
297-300
131 S. Khameneh Asl
S.K. Sadrnezhaad
M. Kianpour Rad
The seeding effect on the microstructure and photocatalytic properties of ZnO nano powders Materials Letters 64 18 September 2010 1935-1938
132 A. Azizi
S.K. Sadrnezhaad
Effects of annealing on phase evolution, microstructure and magnetic properties of mechanically synthesized nickel-ferrite Ceramics International 36 7 September 2010 2241-2245
133 A.E. Kandjani
M.F. Tabriz
N.A. Arefian
M.R. Vaezi
F. Halek
S.K. Sadrnezhaad
Photocatalytic decoloration of Acid Red 27 in presence of SnO2 nanoparticles Water Science & Technology 62 6 September 2010 1256–1264
134 S. Zanganeh
M. Torabi
A. Kajbafvala
N. Zanganeh
M.R. Bayati
R. Molaei
H.R. Zargar
S.K. Sadrnezhaad
CVD fabrication of carbon nanotubes on electrodeposited flower-like Fe nanostructures Journal of Alloys and Compounds 507 2 October 2010 494-497
135 A.E. Kandjani
S.E. Hashemi
M.R. Vaezi
S.K. Sadrnezhaad
Optical and magnetic properties of Co3O4/ZnO Core/Shell nanoparticles Journal of Optoelectronics and Advanced Materials 12 10 October 2010 2057-2062
136 B. Yarmand
S.K. Sadrnezhaad
Structural and optical properties of Pd2+-doped mesoporous TiO2 thin films prepared by sol-gel templating technique Optoelectronics and Advanced Materials – Rapid Communications 4 10 September 2010 1572-1577
137 M. Mazaheri
S.A. Hassanzadeh-Tabrizi
M. Aminzare
S.K. Sadrnezhaad
Synthesis of CeO2 Nanocrystalline Powder by Precipitation Method Ceramic Materials 62 4 November
2010
529-532
138 A. Azizi
S.K. Sadrnezhaad
A. Hasani
Morphology and magnetic properties of FeCo nanocrystalline powder produced by modified mechanochemical procedure Journal of Magnetism and Magnetic Materials 322 21 November 2010 3551–3554
139 M. Torabi
S.K. Sadrnezhaad
Electrochemical evaluation of nanocrystalline Zn-doped tin oxides as anodes for lithium ion microbatteries Journal of Power Sources 196 1 September 2011 399–404
140 E. Ahmadi
M. Malekzadeh
S.K. Sadrnezhaad
Preparation of nanostructured high-temperature TZM alloy by mechanical alloying and sintering International Journal of Refractory Metals and Hard Materials 29 1 January 2011 141–145
141 A. Azizi
M. Mohammadi
S.K. Sadrnezhaad
End-closed NiCoFe-B nanotube arrays by electroless method Materials Letters 65 2 January 2011 289–292
142 H. Abdoli
M. Zarabian
P. Alizadeh
S.K. Sadrnezhaad
Fabrication of aluminum nitride coatings by electrophoretic deposition: Effect of particle size on deposition and drying behavior Ceramics International 37 1 January 2011 313-319
143 M.Yeganeh Ghotbi
N. Bagheri
S.K. Sadrnezhaad
Zinc-stearate-layered hydroxide nanohybrid material as a precursor to produce carbon nanoparticles Journal of Alloys and Compounds 509 5 February 2011 2441-2444
144 H. Abdoli
H.R. Farnoush
H. Asgharzadeh
S.K. Sadrnezhaad
Effect of high energy ball milling on compressibility of nanostructured composite powder Powder Metallurgy 54 5 February 2011 24-29
145 M.R. Bayati
M. Amin Zare
Roya Molaei
S.K. Sadrnezhaad
Micro arc oxidation of nano-crystalline Ag-doped TiO2 semiconductors Materials Letters 65 1 March 2011 840-842
146 M. Torabi
S.K. Sadrnezhaad
Corrosion behavior of polypyrrole/hydroxyapatite nanocomposite thin films electropolymerized on NiTi substrates in simulated body fluid Materials and Corrosion 62 3 March 2011 252-257
147 A. Azizi
A. Yourdkhani
A. Yourdkhani
S.K. Sadrnezhaad
R. Asmatulu
Fe50Co50 nanoparticles via self-propagating high-temperature synthesis during milling Powder Technology 208 3 April
2011
623-627
148 S. Khameneh Asl
M. Keyanpour Rad
S.K. Sadrnezhaad
Electrochemical synthesis of doped TNT as a nano photocatalyst for color degradation applications Desalination and Water Treatment 28 - April
2011
23-27
149 Rafi Ali Rahimi
Ali Ahmadi
Saeid Kakooei
S.K. Sadrnezhaad
Corrosion behavior of ZrO2–SiO2–Al2O3 refractories in lead silicate glass melts Journal of the European Ceramic Society 31 5 May
2011
715-721
150 S. Zanganeh
A. Kajbafvala
N. Zanganeh
R. Molaei
M.R. Bayati
H.R. Zargar
S.K. Sadrnezhaad
Hydrothermal synthesis and characterization of TiO2 nanostructures using LiOH as a solvent Advanced Powder Technology 22 3 May
2011
336-339
151 Y.B. Mollamahaleh
D. Hosseini
M. Mazaheri
S.K. Sadrnezhaad
Surfactant-Free Production of Ni-Based Nanostructures Materials Sciences and Applications 2 5 May
2011
444-452
152 S. Khameneh Asl
M. Keyanpour Rad
S.K. Sadrnezhaad
M.R. Vaezi
The Effect of Microstructure on the Photocatalytic Properties of TiO2 Advanced Materials Research 264-265 - June
2011
1340-1345
153 M. Najafi
M. R. Vaezi
S.K. Sadrnezhaad
Synthesis of nanostructured CuInSe2 (CIS) powder via solvothermal processing using diethylamine as a solvent Journal of Ceramic Processing Research 12 6 June
2011
695-698
154 S. Parvizi
H.R. Hafizpour
S.K. Sadrnezhaad
A. Akhondzadeh
M. Abbasi Gharacheh
Neural network prediction of mechanical properties of porous NiTi shape memory alloy Powder Metallurgy 54 3 July
2011
450-454
155 M. Zakeri
M.R. Rahimipour
S.K. Sadrnezhaad
Study on feasibility of Ti3AlC2 synthesis by mechanical alloying and heat treatment Powder Metallurgy 54 3 July 1
2011
273-277
156 D. Darvishi
D. F. Haghshenas
E. Keshavarz Alamdari
S.K. Sadrnezhaad
IJE Transactions B: Applications 24 2B July
2011
181-190
157 P. Farshchi
S.K. Sadrnezhaad
N. Moharram Nejad
M. Mahmoodi
L. Ibrahimi
Nanotechnology in the public eye: the case of Iran, as a developing country Journal of Nanoparticle Research 13 8 August
2011
3511-3519
158 M. Yeganeh Ghotbi
N. Bagheri
S.K. Sadrnezhaad
Large pore volume mesoporous copper particles and scaffold microporous carbon material obtained from an inorganic–organic nanohybrid material, copper-succinate-layered hydroxide Journal of Colloid and Interface Science 362 1 October
2011
89–93
159 A. Eskandari
M. Aminzare
H. Hassani
H. Barounian
S. Hesaraki
S.K. Sadrnezhaad
Densification Behavior and Mechanical Properties of Biomimetic Apatite Nanocrystals Current Nanoscience 7 5 October 1
2011
776–780
160 S. Shahini
M. Askari
S.K. Sadrnezhaad
Gel–sol synthesis and aging effect on highly crystalline anatase nanopowder Bull. Mater. Sci. 34 6 October 1
2011
1189–1195
161 N. Hassanzadeh
S.K. Sadrnezhaad
Characterization of Constrained Aged Niti Strips for Using In Artificial Muscle Actuators (Technical Note) IJE Transactions A: Basics 24 4A November
2011
321–330
162 S.K. Sadrnezhaad
N. Bagheri
S. Mahshid
Effect of Si Antioxidant on the Rate of Oxidation of Carbon in MgO–C Refractory JE Transactions B: Applications 24 4B December
2011
357–366
163 S. Khameneh Asl
S.K. Sadrnezhaad
M. Keyanpour Rad
Deniz U ̈ Ner
Comparative photodecolorization of red dye by anatase, rutile (TiO2), and wurtzite (ZnO) using response surface methodology Torkish Journal of Chemistry 36 1 January
2012
121-135
164 A. Kajbafvala
J.P. Samberg
H. Ghorbani
E. Kajbafvala
S.K. Sadrnezhaad
Effects of initial precursor and microwave irradiation on step-by-step synthesis of zinc oxide nano-architectures Materials Letters 67 1 January
2012
342-345
165 A. Azizi
S.K. Sadrnezhaad
M. Mostafavi
Control of Particle Size and Morphology of Cobalt-Ferrite Nanoparticles by Salt-Matrix during Annealing International Journal of Modern Physics: Conference Series 5 - 2012 177-181
166 M. Salehi
S.K. Sadrnezhaad
Effect of Kinetic Parameters on Growth of One-Dimensional Tin Oxide Nanostructures International Journal of Modern Physics: Conference Series 5 - 2012 182-187
167 D. Mohammadyani
S.A. Hosseini
S.K. Sadrnezhaad
Characterization of Nickel Oxide Nanoparticles Synthesized via Rapid Microwave-Assisted Route International Journal of Modern Physics: Conference Series 5 - 2012 270-276
168 A. Khoshnevisan
H. Yoozbashizadeh
M. Mozammel
S.K. Sadrnezhaad
Kinetics of pressure oxidative leaching of molybdenite concentrate by nitric acid Hydrometallurgy 111-112 - January
2012
52-57
169 E.Keshavarz Alamdari
D. Darvishi
D.F. Haghshenas
N. Yousefi
S.K. Sadrnezhaad
Separation of Re and Mo from roasting-dust leach-liquor using solvent extraction technique by TBP Separation and Purification Technology 86 - February
2012
143-148
170 F. Nematzadeh
M.R. Akbarpour
S. Parvizi
A.H. Kokabi
S.K. Sadrnezhaad
Effect of welding parameters on microstructure, mechanical properties and hot cracking phenomenon in Udimet 520 superalloy Materials & Design 36 - April
2012
94-99
171 A. Kajbafvala
H. Ghorbani
A. Paravar
J.P. Samberg
E. Kajbafvala
S.K. Sadrnezhaad
Effects of morphology on photocatalytic performance of Zinc oxide nanostructures synthesized by rapid microwave irradiation methods Superlattices and Microstructures 51 4 April
2012
512–522
172 S. Parvizi
V. Hasannaeimi
E. Saebnoori
T. Shahrabi
S.K. Sadrnezhaad
Fabrication of Porous NiTi Alloy via Powder Metallurgy and Its Mechanical Characterization by Shear Punch Method Russian Journal of Non-Ferrous Metals 53 2 April
2012
169–175
173 A. Eskandari
M. Aminzare
Z. Razavi Hesabi
S.H. Aboutalebi
S.K. Sadrnezhaad
Effect of high energy ball milling on compressibility and sintering behavior of alumina nanoparticles Ceramics International 38 4 May
2012
2627-2632
174 M. Yeganeh Ghotbi
N. Bagheri
S.K. Sadrnezhaad
Nanocrystalline copper doped zinc oxide produced from copper doped zinc hydroxide nitrate as a layered precursor Advanced Powder Technology 23 3 May
2012
279-283
175 S.K. Sadrnezhaad
N. Yasavol
M. Ganjali
S. Sanjabi
Property change during nanosecond pulse laser annealing of amorphous NiTi thin film Bull. Mater. Sci. 35 3 June
2012
357–364
176 S. Mohseni Meybodi
S.A. Hosseini
M. Rezaee
S.K. Sadrnezhaad
D. Mohammadyani
Synthesis of Wide Bandgap Nanocrystalline NiO Powder via a Sonochemical Method Ultrasonics Sonochemistry 19 4 July
2012
841–845
177 A. Ghasemi
S.R. Hosseini
S.K. Sadrnezhaad
Pore control in SMA NiTi scaffolds via space holder usage Materials Science and Engineering C 32 5 July
2012
1266-1270
178 V. Fahimpour
S.K. Sadrnezhaad
F. Karimzadeh
Corrosion behavior of aluminum 6061 alloy joined by friction stir welding and gas tungsten arc welding methods Materials & Design 39 - August
2012
329-333
179 Rafi Ali Rahimi
S.K. Sadrnezhaad
Effects of ion-exchange and hydrolysis mechanisms on lead-silicate glass corrosion Corrosion 68 9 September
2012
793-800
180 M. Mozammel
S.K. Sadrnezhaad
A. Khoshnevisan
H. Youzbashizadeh
Kinetics and reaction mechanism of isothermal oxidation Kinetics and reaction mechanism of isothermal oxidation J Therm Anal Calorim 109 1 5 September
2012
1-9
181 V. Fahimpour
S.K. Sadrnezhaad
Magnesium nanopowder for hydrogen absorption and ammonium perchlorate decomposition Materials Letters 85 - October
2012
128–131
182 S. Naddaf Dezfuli
S.K. Sadrnezhaad
M.A. Shokrgozar
S. Bonakdar
Fabrication of biocompatible titanium scaffolds using space holder technique J Mater Sci: Mater Med 23 10 October
2012
2483-2488
183 M. Aminzare
Z. Amoozegar
S.K. Sadrnezhaad
An investigation on the influence of milling time and calcination temperature on the characterization of nano cerium oxide powder synthesized by mechanochemical route Materials Research Bulletin 47 11 November
2012
3586–3591
184 M. Malekjafarian
S.K. Sadrnezhaad
Closed-cell Al alloy composite foams: production and characterization Materials & Design 42 - December
2012
8–12
185 M. Salehi Doolabi
S.K. Sadrnezhaad
D. Salehi Doolabi
M. Asadirad
Influence of pulse parameters on electrocodeposition of Cr–Al2O3 nanocomposite coatings from trivalent chromium bath International Heat Treatment and Surface Engineering 6 4

December
2012

178-184
186 F. Nematzadeh
S.K. Sadrnezhaad
Effects of material properties on mechanical performance of Nitinol stent designed for femoral artery: Finite element analysis Sientia Iranica Transactions B: Mechanical Engineering 19 6

December
2012

1564–1571
187 S.K. Sadrnezhaad
M. Aryana
N. Hassanzadeh Nemati
M. Alizadeh
A. Ebadifar
Single and double stage sintering of mechanically alloyed powder for nanostructured Ti6Al4V foams usable in cancellous scaffolds International Heat Treatment and Surface Engineering 7 1

January
2013

43-48
188 M. Aminzare
A. Eskandari
M.H. Baroonian
A. Berenov
Z. Razavi Hesabi
M. Taheri
S.K. Sadrnezhaad
Hydroxyapatite nanocomposites: Synthesis, sintering and mechanical properties Ceramics International 39 3

April
2013

2197-2206
189 E. Keshavarz Alamdari
S.K. Sadrnezhaad
Developing a Thermodynamical Method for Prediction of Activity Coefficient of TBP Dissolved in Kerosene International Journal of Nonferrous Metallurgy 2 2

April
2013

68-74
190 F. Nematzadeh
S.K. Sadrnezhaad
Effects of the Ageing Treatment on the Superelastic Behavior of a Nitinol Stent for an Application in the Esophageal Duct: a Finite-Element Analysis Materiali in tehnologije/ Materials and technology 47 4

April
2013

453-459
191 V. Fahimpour
S.K. Sadrnezhaad
F. Karimzadeh
Microstructure and Mechanical Property Change During FSW and GTAW of Al6061 Alloy Metallurgical And Materials Transactions A 44A 5

May
2013

2187-2195
192 F. Nematzadeh
S.K. Sadrnezhaad
Effects of Crimping on Mechanical Performance of Nitinol Stent Designed for Femoral Artery: Finite Element Analysis Journal of Materials Engineering and Performance 22 11

November
2013

3228–3236
193 G.R. Mirshekari
A. Saatchi
A. Kermanpur
S.K. Sadrnezhaad
Laser welding of NiTi shape memory alloy: Comparison of the similar and dissimilar joints to AISI 304 stainless steel Optics & Laser Technology 54 -

December
2013

151-158
194 F. Nematzadeh
S.K. Sadrnezhaad
Finite element analysis of mechanical performance of nitinol biliary stent: effect of material properties Materials Research Innovations 17 2 December
2013
53-59
195 A. Rostami
S.K. Sadrnezhaad
G. A. Bagheri
Production of nanostructured Ni-Ti-Ag alloy by mechanical alloying Advanced Materials Research 829 - January
2014
67-72
196 F. Nematzadeh
S.K. Sadrnezhaad
A.H. Kokabi
M. Razani
A.H. Mohagheghi
Effect of Material Properties on the Mechanical Performance of Nitinol Esophageal Stent: Finite Element Analysis Materials Science Forum 773-774 - February
2014
9-17
197 F. Azizinezhad
Z. Nasrollahi
S.K. Sadrnezhaad

Synthesis of the silver nanoparticles with the using of camomile plant-

European Journal of Experimental Biology 4 2 February
2014
124-127
198 F. Nematzadeh
S.K. Sadrnezhaad
Effects of design parameters and Af temperature on superelastic behaviour of Nitinol stent for application in biliary duct: finite element analysis Materials Technology: Advanced Performance Materials 29 2

March
2014

65-75
199 N. Zanganeh
S. Zanganeh
A. Rajabi
M. Allahkarami
R.Rahbari Ghahnavyeh
A. Moghaddas
M. Aieneravaie
N. Asadizanjani 
S.K. Sadrnezhaad
 

Journal of Coordination Chemistry

67 3 March
2014
555–562
200 M. Torabi
M. Soltani
S.K. Sadrnezhaad
Impedance Analysis of Growth and Morphology of Electropolymerized Polypyrrole Nanocomposites

Journal of New Materials for Electrochemical Systems

17 2 April
2014
129-132
201 M. Salehi Doolabi
S.K. Sadrnezhaad
D. Salehi Doolabi
Electroplating and characterization of Cr–Al2O3 nanocomposite film from a trivalent chromium bath

Anti-Corrosion Methods and Materials

61 4 May
2014
205-214
202 Alireza Cheraghi
M. Shaker Ardakani
E. Keshavarz Alamdari
D. Haghshenas
Dariush Darvishi
S.K. Sadrnezhaad
Thermodynamics of vanadium (V) solvent extraction by mixture of D2EHPA and TBP International Journal of Mineral Processing 138

-

10
May
2014

49-54
203 A. Rajabi
M. Aieneravaie
V. Dorosti
S.K. Sadrnezhaad

Materials Technology: Advanced Performance Materials

29 4  July
2014
227-231
204 A.R. Mahmoudian
S.K. Sadrnezhaad
Z. Manafi
Simulation of Bioleaching Heat Effects for Enhancement of Copper Recovery from Sarcheshmeh Chalcopyrite

Metallurgical and Materials Transactions B

45B 4 August
2014
1204-1212
205 M. Malekjafarian
S.K. Sadrnezhaad
Effect of SiC on microstructural features and compressive properties of aluminum foam

Scientia Iranica

21 4 August
2014
1325-1329
206 N. Soltani
S.K. Sadrnezhaad
A. Bahrami

Materials and Manufacturing Processes

29 10 September
2014
1237-1244
207

N. Zanganeh
A. Rajabi
M. Torabi
M. Allahkarami
A. Moghaddas
S.K. Sadrnezhaad

Journal of Molecular Structure

1074 - September
2014
250–254
208 S. Tabatabaei
S.K. Sadrnezhaad

Facile synthesis of mono-disperse thermally immiscible Ag-Ni alloy nanoparticles at room temperature

Bulletin of Materials Science
ISSN:
0250-4707

37 6 October
2014
1447-1452
209 S.K. Sadrnezhaad
S. Katiraei
A. Ghasemi
Intermetallic Phase Formation during Combustion Synthesis of Mechanically Activated Ni-Ti Alloy International Journal of Advanced Design and Manufacturing Technology 7

4

December
2014

1-7
210 Taherh Moshfeghi
Nahid Hassanzadeh
Vahab Dehlaghi
S.K. Sadrnezhaad
Fracture Analysis of the Orthopedic Plates used in Joining of the Lower-Limb Bones Cumhuriyet Science Journal (CSJ) 36 3 2015 2718-2724
211 A.A. Shehab
Adel K. Mahmoud
S.K. Sadrnezhaad
M.J. Torkamany
S.A. Jawad
Pulsed Nd:YAG Laser Dissimilar Welding of Grade 2 Titanium Alloy to 3105-O Aluminum Alloy using AlSi5 Filler Metal International Journal of Enhanced Research in Science Technology & Engineering 4

4

April
2015

243-252
212 Rafi Ali Rahimi
S.K. Sadrnezhaad
Generation and Collapse of Bubbles in Lead Silicate Glass Glass Physics and Chemistry 41

3

1
May
2015

411-423
213 Mahsa Jalali
R. Siavash Moakhar
Ajay Kushwaha
G.K. Liang Goh
S.K. Sadrnezhaad
Nastaran Riahi-Noori
TiO2 surface nanostructuring for improved dye loading and light scattering in double-layered screen-printed dye-sensitized solar cells Journal of Applied Electrochememistry 45

8

24
May
2015

831-838
214 Parisa Vahdatkhah
S.K. Sadrnezhaad
Pulsed Electrodeposition of Gold Nanoparticles on Fluorine-Doped Tin Oxide Glass and Absorption-Based Surface Plasmon Resonance Evaluation Journal of Nano Research 33

-

1
June
2015

11-26
215 S. Olumi
S.K. Sadrnezhaad
M. Atai
The Influence of Surface Nanocrystallization Induced by Shot Peening on Corrosion Behavior of NiTi Alloy Journal of Materials Engineering and Performance 24

8

23
June
2015

3093-3099
216 Mahsa Jalali
R. Siavash Moakhar
Ajay Kushwaha
Gregory Kia Liang Goh
Nastaran Riahi-Noori
S.K. Sadrnezhaad
Enhanced dye loading-light harvesting TiO2 photoanode with screen printed nanorod-nanoparticles assembly for highly efficient solar cell Electrochimica Acta 169

-

1
July
2015

395-401
217 Hassan Koohestani
S.K. Sadrnezhaad
Photocatalytic Activity of Immobilized Geometries of TiO2 Journal of Materials Engineering and Performance 24

7

7
July
2015

2757-2763
218 G.R. Mirshekari
A. Kermanpur
A. Saatchi
S.K. Sadrnezhaad
A.P. Soleymani
Microstructure, Cyclic Deformation and Corrosion Behavior of Laser Welded NiTi Shape Memory Wires Journal of Materials Engineering and Performance 24 9 15
September
2015
 3356-3364
219 Shadie Hatamie
OmidAkhavan
S.K. Sadrnezhaad
M.M. Ahadian
Mandar M. Shirolkar
Haiqian Q. Wang
Curcumin-reduced graphene oxide sheets and their effects on human breast cancer cells Materials Science and Engineering C 55  - 1
October
2015
 482–489
220 S.A. Hosseini
S. Akbarinia
D. Mohammadyani
S.K. Sadrnezhaad
Enhanced corrosion resistance of porous NiTi with plasma sprayed alumina coating Corrosion Engineering, Science and Technology 50

8

1
December
2015

595-600
221 Parisa Vahdatkhah
S.K. Sadrnezhaad
Influence of Substrate, Additives, and Pulse Parameters on Electrodeposition of Gold Nanoparticles from Potassium Dicyanoaurate Metallurgical and Materials Transactions B 46 6 1
December
2015
 2584-2592
222 Hassan Koohestani
S.K. Sadrnezhaad
Photocatalytic degradation of methyl orange and cyanide by using TiO2/CuO composite Desalination and Water Treatment 57 46 1
January
2016
1-10
223 Hassan Koohestani
S.K. Sadrnezhaad
Amirabbas Kheilnejad
Investigation of photocatalytic performance of TiO2 network and fiber geometries Desalination and Water Treatment 57 7 18
January
2016
1-7
224 Shahab Ahmadi
S.K. Sadrnezhaad
A novel method for production of foamy [email protected] shell Ti6Al4V bone-like composite Journal of Alloys and Compounds 656 - 25
January
2016
416-422
225 Shahab Ahmadi

Iman Mohammadi

S.K. Sadrnezhaad
Hydroxyapatite based and anodic Titania nanotubes biocomposite coatings: fabrication, characterization and electrochemical behavior Surface & Coatings Technology 287 - 15
February
2016
 67–75
226 Hassan Koohestani
S.K. Sadrnezhaad
Improvement in TiO2 photocatalytic performance by ZrO2 nanocompositing and immobilizing Desalination and Water Treatment 57 58 21
May
2016
 28450-28459
227 Reza Ahmadi
S.K. Sadrnezhaad
R.N. Zangeneh
M.A. Oghabian
Kinetics of oxygen adsorption on ZnS nanoparticles synthesized by precipitation process Materials Science-Poland 34 2 1
June
2016
 260-265
228 G.R. Mirshekari
A. Saatchi
A. Kermanpur
S.K. Sadrnezhaad
Effect of Post Weld Heat Treatment on Mechanical and Corrosion Behaviors of NiTi and Stainless Steel Laser-Welded Wires Journal of Materials Engineering and Performance 25 6 1
June
2016
2395-2402
229  Nafiseh Hassanzadeh
S.K. Sadrnezhaad
Guohua Chen
 In-situ hydrothermal synthesis of Na3MnCO3PO4/rGO hybrid as a cathode for Na-ion battery Electrochimica Acta 208 -  1
August
2016
 188-194
230 Shahab Ahmadi
Zohreh Riahi
Aylar Eslami
S.K. Sadrnezhaad
Fabrication mechanism of nanostructured HA/TNTs biomedical coatings: an improvement in nanomechanical and in vitro biological responses J Mater Sci: Mater Med 27 10 1
October
2016
 Article 150
231 Saeid Ramezani
Arash Ghazitabar
S.K. Sadrnezhaad
Synthesis and characterization of chitosan coating of NiFe Journal of the Iranian Chemical Society 13 11 27
November
2016
2069–2076
232  Nafiseh Hassanzadeh
S.K. Sadrnezhaad
Guohua Chen
Ball mill assisted synthesis of Na3MnCO3PO4 nanoparticles anchored on reduced graphene oxide for sodium ion battery cathodes Electrochimica Acta 220 - 1
December
2016
683-689
233 Sara Fazeli
Morteza Vahedpour
S.K. Sadrnezhaad
Comparison of the mechanical properties of NiTi/Cu bilayer by nanoindentation and tensile test: molecular dynamics simulation Materials Research Express 3 12 7 December
2016
Article 126504
234 M. Salehi Doolabi
B. Ghasemi
S.K. Sadrnezhaad
A. Feizabadi
A. HabibollahZadeh
D. Salehi Doolabi
M. AsadiZarch
Comparison of Isothermal with Cyclic Oxidation Behavior of ‘‘Cr-Aluminide Oxidation of Metals 87 1 1
February
2017
57-74
235 Sara Fazeli
Morteza Vahedpour
S.K. Sadrnezhaad
What is the copper thin film thickness effect on thermal properties of NiTi/Cu bi-layer? Materials Research Express 4 2 1
February
2017
Article 026501
236 F. Kordhaghi
S.K. Sadrnezhaad
Synthesis and Characterization of Anatase-coated Multiwall Carbon Nanotube for Improvement of Photocatalytic Activity IJE Transactions A: Basics 30 4 1
April
2017
543-550
237 Sina Safaei
Farshad Asgari
Moein Arzi
Alireza Hojaji
S.K. Sadrnezhaad
Synthesis and Characterization of Carbon-Stabilized Magnesium Nanoparticles Journal of Cluster Science 28 3 1
May
2017
881-889
238

S. Noroozi

S.K. Sadrnezhaad
IJE Transactions A: Basics 30 7 1
July
2017
1048-1053
239 V. Fahimpour
S.K. Sadrnezhaad
Breakage Mechanism of Mg During Ball Milling with NaCl, KCl and Urea for Nanopowder Production Transactions of the Indian Institute of Metalsals 70 7 1
September
2017
1783–1793
240 M. Salehi Doolabi
B. Ghasemi

S.K. Sadrnezhaad
A. Habibolahzadeh
K. Jafarzadeh
Oxidation of Metals on
line
- 29
August
2017
1-23
241 M. Salehi Doolabi
B. Ghasemi

S.K. Sadrnezhaad
A. Habibolahzadeh
K. Jafarzadeh
Hot corrosion behavior and near-surface microstructure of a “Low-Temperature High-Activity Cr-aluminide” coating on Inconel 738LC exposed to Na Corrosion Science 128 - 1
November
2017
42-53
242 A. Feizabadi
M. Salehi Doolabi

S.K. Sadrnezhaad
H.R. Zafarani
D. Salehi Doolabi
M. AsadiZarch
MCDM selection of pulse parameters for best tribological performance of Cr–Al2O3 nano-composite co-deposited from trivalent chromium bath Journal of Alloys and Compounds 727 - 15
December
2017
286-296
243 R. Nikonam
S.K. Sadrnezhaad
Mechanism of Nanostructured Fluorapatite Formation from CaO, CaF2 and P2O5 Precursors via Mechanochemical Synthesis Method Progress in Reaction Kinetics and Mechanism - - 2017 -